Australian Monitor Integrator Rack - Manual (Page 9)

11 Mounting the top to the side panels
With the fan tray and corners removed from the top piece you can use the
8 x M8x25 hex bolts supplied in the accessories to mount the top to the
side frames. It is easiest to remove the inner panel from the side frames
for this step as shown.
Ensure the side panels are up the right way when mounting to the top and
bottom piece. The RU markings on the side panel should start with “01” at
the bottom.
12 Mounting the bottom to the side panels
With the corners removed from the bottom piece you can use the 8 x M8x25
hex bolts supplied in the accessories to mount the bottom to the side frames.
PAGE 9 INTEGRATOR RACKS INSTALLATION AND OPERATION MANUAL
MAKING THE FRAME