Rivera Primo Brute IV Extreme - Manual (Page 7)

STEP 21
There are 3 mounting bolts used to attach
the nose cover. Coat each with 2 drops of
Blue threadlock and torque until secure.
STEP 22
The outer belt guard together with its stylish
derby cover is the final component needing
installation. Position the guard up against
the stand-offs and check to make certain all
mounting holes properly line-up and that the
guard sits square¬ly up against the stand-
offs. At this time install the oil filter if pur-
chased separately.
STEP 23
Coat the threads of the mounting bolts with
2 drops of Blue threadlock and start the
bolts with your Allen driver.
STEP 24
Continue the mating process by fastening all
4 bolts until they have seated within the
countersunk holes in the outer guard.
Now you can stand-back and admire your
work !
7
Brute IV Extreme Instructions_Brute IV Extreme Instructions 4/17/12 3:47 PM Page 7