Adaptec WirelessTM - Manual (Page 28)

21
Installing the Adaptec Wireless Utility
Note: Windows XP users only—Windows XP has a built-in
configuration application called Zero Configuration, which
automatically takes over as the default utility for your
Wireless PCI Adapter.
When the Adaptec Wireless Utility installation is complete, a
message appears telling you that you must disable Windows
Zero Configuration before using the Adaptec Wireless Utility.
Adaptec recommends that you use the Adaptec Wireless
Utility instead of the Windows application. For more
information, see
Disabling Zero Configuration (Windows XP
only) on page 22 .
The software installation is complete. The Adaptec Wireless Utility
icon appears on your Windows taskbar, as shown below. (Your
system may automatically restart first.)
See Installing Network Protocols on page 24 to continue.
Note: If you are using Windows XP and you choose to keep
Zero Configuration as the default utility for your Wireless PCI
Adapter, you are finished the Installation Task List (
page 4 ).
Refer to your Windows XP documentation to continue the
installation and set-up.
Adaptec Wireless Utility icon