Alpine DVA-5205P - Manual (Page 23)

23
Video output ON/OFF
Video output ON/OFF
(Only when CVA-1005R/IVA-M700R/
IVA-C800R is connected)
When this unit is used with the CVA-
1005R/IVA-M700R/IVA-C800R + the
TME-M750 (Extra Monitor for Rear Seat),
the DVD video can be viewed independ-
ently of what’s being viewed on the CVA-
1005R/IVA-M700R/IVA-C800R.
For example, DVD video can be moni-
tored on the Rear Monitor, while a
Navigation map is displayed on the CVA-
1005R/IVA-M700R/IVA-C800R. If an
audio source is selected, the main audio
system will be used to listen to the CVA-
1005R/IVA-M700R/IVA-C800R. Use the
RCA connectors at the rear of the DVA-
5205P to feed audio to your Rear monitor.
Set AUX OUT of “Selecting Rear
Monitor” on the CVA-1005R/IVA-
M700R/IVA-C800R side to AUX 1.
Note: This output is at a fixed level and requires a
preamp with a volume control to adjust
listening levels.
BAND
RTN
V.OUT
Change the source on the CVA-
1005R/IVA-M700R/IVA-C800R
side to MD, CD, radio, etc.
Use the “Playing 2 Sources
Simultaneously” function on the
CVA-1005R/IVA-M700R/IVA-
C800R side to select DVD with
the V.SEL button.
Press “V.OUT” on the
remote control unit for
this equipment at least
2 seconds.
To release, press “V.OUT” for
at least 2 seconds.
Note: Refer to the Instruction Manual of the CVA-
1005R/IVA-M700R/IVA-C800R for operation
on the CVA-1005R/IVA-M700R/IVA-C800R
side.