Alpine DVA-5205P - Manual (Page 34)

34
SET UP
Changing the LED indicator setting
Changing the LED
indicator setting
Use the following procedure to set whether or
not the product’s LED indicators are on or off.
Select “LED INDICATOR” under
“Changing the default settings
(SET UP)” on page 24.
Use the “Joystick” to select the
“ON” or “OFF”, then press
“ENT”.
ON
OFF
The LED indicators are lit, indicating the
product’s operating status. “ON” is selected
upon shipment from the factory.
The LED indicators are turned off.
When “OFF” is set, the indicators do not light
even when the power is on.
DISP
MENU
SET
ENT
BAND
RTN
V.OUT
ENT
ENT