Alpine CDA-7875 - Manual (Page 14)

12
-EN
Displaying the Title/Text
It is possible to display the CD/Station title if the
title has been previously inputted. For details, see
Titling Disc/Stations (page 13). Text information,
such as the disc name and the track name, will be
displayed if playing a CD text compatible disc.
1
Press the TITLE button.
The mode will change every time the button is
pressed.
About “Title” and “Text”
Title: With this device, it is possible to input the CD/
Station name (refer to page 13). This inputted
name is referred to as a “title.”
Text: Text compatible CDs contain text information
such as the disc name and track name. Such
text information is referred to as “text.”
Radio mode:
↓
↓
↓
FREQUENCY DISPLAY
TITLE DISPLAY
∗2
CLOCK DISPLAY
CD/Changer mode:
ELAPSED TIME DISPLAY
↓
↓
TEXT DISPLAY (DISC NAME)
∗1
↓
CLOCK DISPLAY
↓
TEXT DISPLAY (TRACK NAME)
∗1
↓
TITLE DISPLAY
∗2
∗1
Displayed during playback of a disc with CD
Text. “NO TEXT” will be displayed when the
CD contains no Text data.
∗2
“--------” will be displayed when the title has
not been inputted.
NOTES
• Some characters may not be displayed correctly with
this device, depending on the character type.
• The CD changer must also be CD Text compatible for
the Text information to be displayed.
• When the CD Text Scroll Setting (refer to page 7) is set
to “SCR MANU”, press and hold the TITLE button for
more than 3 seconds to scroll the Text information only
once (TEXT DISPLAY mode only).
T.S.M.
g DN
f UP TITLE
Audio Control :/J
Basic Operation