Silverline Electric Chainsaw Sharpener 220W - Manual (Page 6)

www.silverlinetools.com
5
678973
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards
Power Tool Use & Care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation
Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained
Grinding Tool Safety
• Always wear appropriate personal protective equipment. When using this machine,
adequate eye protection, ear defenders and breathing protection must be worn
• DO NOT operate this machine without the appropriate guards in place
• Grinding tool accessories must be mounted, used and stored in compliance with the
manufacturer’s recommendations
• The maximum speed of the cutting/grinding disc or other accessory must always be
higher than the maximum speed of the machine on which they are mounted
• Do not use any form of spacers or adapters in an attempt to make an incorrectly sized
wheel fit your machine
• Ensure that the cutting/grinding disc or accessory is fitted correctly and securely
before use. Run the machine with the disc or accessory fitted, but without load, for a
reasonable time before attempting to cut/grind. If excessive vibration occurs, stop the
machine, investigate and correct the cause before use. Seek professional guidance if
you are in doubt about how to operate the machine safely
• If the grinding wheel vibrates, turn off the machine immediately and check it is mounted
correctly securely and that it is not damaged
• All wheels and accessories must be checked before installation. If a wheel is damaged
in any way, such as by being chipped, fractured, warped or misshapen, DO NOT USE
AND DISCARD. If you are unsure about whether a disc is safe to operate, DO NOT USE
AND DISCARD
• Always ensure that accessories are suitable to use. Check the expiry date on the label.
Resin-based and other grinding and cutting discs and wheels CANNOT SAFELY BE USED
beyond their expiry date
• Do not allow discs to become wet or contaminated with oil. If you suspect that a wheel
has degraded in storage, or if you are unsure about whether its expiry date has passed,
DO NOT USE AND DISCARD
• The wheel will continue to rotate for some time after the machine has been switched
off. Allow the moving parts to stop completely without interference. Do not try to stop
the machine by holding an object against the disc.
• A grinding wheel will gradually wear down during use, reducing its size. If a wheel
becomes too small to work with easily, stop using it and replace it with a new disc
220W Chainsaw Sharpener
1 Grinding Wheel
2 Eye Shield
3 Wheel Guard
4 Handle
5 On/Off Switch
6 Spindle Locking Hole
Product Familiarisation
7 Depth Adjustment Knob
8 Angle Locking Knob
9 Chain Locking Knob
10 Angle Scale
11 Chain Clamp Assembly
12 Chain Stop Adjustment Knob
13 Chain Stop
14 Spindle Locking Pin
15 Spanner
16 Box Spanner
Unpacking Your Tool
• Carefully unpack and inspect your tool. Familiarise yourself with all its features and
functions
• Ensure that all parts of the tool are present and in good condition. If any parts are
missing or damaged, have such parts replaced before attempting to use this tool
678973_Z1MANPRO1.indd 5 17/05/2013 15:49