RMS Technologies R325 DRIVER W/PDT - Manual (Page 23)

RMS Technologies Page 23 Version 1.20
R325I Single Axis Controller/Driver Manual 02/13/2006
13. Appendix A
Recommended Cable Configurations: DC Supply to Driver
Cable length, wire gauge and power conditioning devices play a major role in the performance
of your RMS Technologies Driver and Motor.
NOTE: The length of the DC power supply cable to the Driver should not exceed 50 feet.
Example A demonstrates the recommended cable configuration for DC power supply cabling
under 50 feet long. If cabling of 50 feet or longer is required, the additional length may be
gained by adding an AC power supply cable.
Correct AWG wire size is determined by the current requirement plus cable length. Please see
the Driver Supply Cable AWG Table in this Appendix.