SawStop 1.75HP - Manual (Page 61)

SawStop 10” Professional Cabinet Saw 59
Using Y
our
Saw
Using Your Saw
Using an Out-Feed Table
You should use an out-feed table to support your work when cutting pieces longer than approximately
4 feet. The out-feed table attaches fl ush against the back edge of your saw and prevents your workpiece from
dropping off the back of your saw during cutting.
The SawStop ® Out-Feed Table is designed for use with both the T-Glide TM Professional Series II Fence System
(see Fig. 84) and the Premium Fence Assembly (see Fig. 74 on page 53).
You can learn more about the SawStop ® Out-Feed Table from an authorized SawStop distributor or at
www.sawstop.com.
Fig. 84