Push stick construction – SawStop 1.75HP User Manual
Page 96
Advertising
94 SawStop 10” Professional Cabinet Saw
Push Stick Construction
This diagram illustrates a typical push stick. Push sticks should be
constructed from material that is sturdy and electrically non-conductive
such as scrap wood. Push sticks should always be used when rip
cutting pieces narrower than 6 inches.
Squares are 1 inch.
Push stick should be
1
⁄ 2
inch to
3
⁄ 4
inch thick.
1 1/2"
1/2"
Advertising