Attero Tech InBox/OutBox - Manual (Page 30)

InBox / OutBox
User Manual
 Attero Tech LLC 2010 Page 25 614-00005-04
7.4 – OutBox X2
The CobraNet interface unit shall provide two balanced outputs on front panel with XLR connectors. The internal digital to
analog signal conversion shall be performed at 24-bit resolution with a sampling frequency of 48 kHz. The CobraNet
interface unit shall receive power over the Ethernet cable from an 802.3af compliant network switch. The CobraNet interface
shall be wall mounted in a standard dual gang junction box.
The CobraNet interface shall be compatible with Attero Tech Control Center software for flexible control and monitoring in
system applications. The CobraNet interface shall be compliant with the RoHS directive.
The CobraNet interface shall be the Attero Tech OutBox X2.
7.4.1 – OutBox X2 Device Specifications
CobraNet Network
Physical Level: Standard Ethernet
Connector: Single RJ-45
Cable Quality: CAT-5
Transmission Speed: 100 Mbps
Power Requirements
48V via 802.3af PoE
compliant Ethernet switch
Power Consumption 4W
Dimensions
Main Unit: 3.59” x 2.72” x
1.965” (w x h x d)
Weight 0.75 lbs
Compliance
RoHS, FCC Part 15 Class B
Compliant
Audio Outputs
Output Type:
Balanced with automatic
muting upon loss of
CobraNet signal
Output Impedance:
200 Ω balanced,
100 Ω unbalanced
Maximum Output Level: +10 dBu
Audio Performance:
System Noise: -83 dBu
System THD+N:
< 0.006% - 1kHz input @ -3
dB below clipping
Frequency Response 20 Hz – 20 kHz, +/- 1 dB
Sample Rate 48 kHz only