Attero Tech InBox/OutBox - Manual (Page 31)

InBox / OutBox
User Manual
 Attero Tech LLC 2010 Page 26 614-00005-04
7.5 – OutBox R8
The CobraNet interface unit shall provide eight single-ended outputs on front panel with RCA connectors. The internal
digital to analog signal conversion shall be performed at 24-bit resolution with a sampling frequency of 48 kHz. The
CobraNet interface unit shall receive power over the Ethernet cable from an 802.3af PoE compliant network switch. The
CobraNet interface shall be wall mounted in a standard dual gang junction box.
The CobraNet interface shall be compatible with Attero Tech Control Center software for flexible control and monitoring in
system applications. The CobraNet interface shall be compliant with the RoHS directive.
The CobraNet interface shall be the Attero Tech OutBox R8.
7.5.1 – OutBox R8 Device Specifications
CobraNet Network
Physical Level: Standard Ethernet
Connector: Single RJ-45
Cable Quality: CAT-5
Transmission Speed: 100 Mbps
Power Requirements
48V via 802.3af PoE
compliant Ethernet switch
Power Consumption 4W
Dimensions
Main Unit: 3.59” x 2.72” x
1.965” (w x h x d)
Weight 0.75 lbs
Compliance
RoHS, FCC Part 15 Class B
Compliant
Audio Outputs
Output Type:
Single-ended with
automatic muting upon
loss CobraNet of signal
Output Impedance: 680 Ω
Maximum Output Level: +9 dBu
Audio Performance
Noise: -82 dBu
System THD+N:
< 0.007% - 1 kHz input @ 3
dB below clipping
Frequency Response 20 Hz - 20 kHz, +/- 1 dB
Sample Rate 48 kHz only