Attero Tech unD32 BoB - Manual (Page 20)

unD32 BoB
User Manual
 Attero Tech LLC 2013 Page 19 614-00012-01
5 – Device Specifications
5.1 – Architects and Engineering Spec
The Dante Break Out Interface shall have 32 balanced analog output channels. Each channel shall be capable of being
driven from a unique Dante audio flow, such that a maximum of 32 different audio signals can be output
simultaneously. The unit shall have a 16x2 character LED display and 6 buttons on the front panel which allow all
parameters of the unit to be adjusted and monitored. All parameter changes will be nonvolatile and self-restoring in
the event of AC power interruption. The unit’s display shall show Dante audio flow name, volume setting in dB, and
relative output level for each channel. The unit shall accept worldwide voltages from 100 - 240VAC,50Hz/60Hz and
have active PFC (power factor correction). The unit shall be compliant with FCC Part 15, CE, and UL requirements.
Analog output grounding and shielding shall be compliant with AES48-2005 guidelines. The unit shall be the Attero
Tech unD32 BoB.
5.2 – Device Specifications
Output Type: Balanced with automatic muting upon loss of Dante signal
Output Impedance: 200 ohms balanced, 100 ohms unbalanced (i.e. either “+” or “-” output with respect to
ground)
Output Noise: < -90dBu @ 0dB gain
Dynamic Range: > 110dB
Maximum Output Level: +20dBu
System THD: < 0.05% at any gain, input signal 3dB below maximum
Output Channels: 32
Audio Network Dante
Network Ports 3
Power Consumption: 45 W maximum at 100V-240VAC
Certifications: FCC Part 15 Class A, CE, UL. Compliant with AES48-2005 Grounding/EMI Guidelines
Dimensions: 1.75” H x 19” W x 6” D
Weight 5 lbs