Und32 bob, User manual, Declaration of conformity – Attero Tech unD32 BoB User Manual
Page 3
unD32 BoB
User Manual
Attero Tech LLC 2013
Page 2
614-00012-01
DECLARATION OF CONFORMITY
Attero Tech, LLC
1315 Directors Row
Fort Wayne, Indiana 46808
Equipment Description: 32 Channel Dante Audio Digital to Analog Converter
Equipment Model Designation: OutBox unD32
Application of Council Directive: 73/23/EEC on the harmonization of the laws related to Member States relating
to electrical equipment designed for use within certain voltage limits, as amended by: Council Directive
93/68/EEC and
Council Directive 89/336/EEC on the approximation of the laws related to Member States relating to electromagnetic
compatibility, as amended by: Council Directive 93/68/EEC.
Referenced Safety Standards:
Referenced EMC Standards:
EN60950:
EN61000-6-3: 2001
EN61000-6-1:2001
EN55022 Class A
EN61000-3-2
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
The equipment specified above conforms to the above Directive(s) and Standard(s)
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules and EN55022. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.