American International Fusion Scan 250 EX - Manual (Page 2)

Fusion Scan 250 EX™ Safety Precautions
American DJ ® - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 4 American DJ ® - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 3
• DMX-512 Protocol Compatible (Six DMX Channels)
• 3 Operating Modes - Master/Slave; Stand Alone; DMX Control
• Internal Microphone
• Digital Display for Address and Function Setting
• UC3 Controller (Not Included)
Fusion Scan 250 EX™ Features
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
®
.
During operation the housing may become extremely hot. Avoid touch-
ing the unit with bare hands while in use.
American DJ
®
will not accept any liability for any resulting damages
caused by the non-observance of this manual or any unauthorized
modification to this unit.
Fusion Scan 250 EX™ Handling Precautions
Fusion Scan 250 EX™ Warranty Registration
The Fusion Scan 250 EX™ carries a 1 year (365 days) limited war-
ranty. Please fill out the enclosed warranty card to validate your
purchase and warranty. You may also register your product online at
www. americandj.com. All returned service items whether under war-
ranty or not, must be freight pre-paid and accompany a return autho-
rization (R.A.) number. If the unit is under warranty you must provide
a copy of your proof of purchase invoice. Please contact American
DJ® customer support for a R.A. number.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Fusion Scan 250 EX™ General Instructions
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Please route your power cord out of the way of
foot traffic.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electri-
cal
shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the top cover under any conditions. There are no
user serviceable parts inside.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged in any
way.
• Never operate this unit when it’s cover is removed.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• This unit is intended for indoor use only, use of this product out
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power Cord Protection - Power cords should be routed so they are
not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, conve-
nience receptacles, and the point where they exit from the unit.
• Cleaning - Follow the directions on page 15.
• Heat -The unit should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
DANGER
VISIBLE LASER RADIATION
-AVOID DIRECT EYE EXPOSURE
LASER DIODE
WAVELENGTH : 635~650 nm
Max Output : <4.9mW
Class IIIa Laser Product
! !