EZ Dupe Portable USB 2 Copy Duplicator & Tester - Manual (Page 5)

4
5. Function Table
Function Description
1. Copy USB/SD/Micro SD/CF Flash copy.
2. Compare
This option makes bit‐by‐bit comparison between the master source
and all other copied flash cards.
3. Copy+Compare
This option will make a copy first and then compare the copied Flash
devices with the source immediately after the copy has finished.
4. Utility
4.1 Device Info.
This function will show the Flash device’s general information including
capacity, format and data size.
4.2 Chk USB Virus To check USB VIRUS on Flash devices.
4.3 Capacity Check To check Flash devices real capacity.
4.4 Format FAT To execute Flash FAT16/32 format.
4.5 Measure Speed To measure Flash device’s read and write speed.
4.6 Erase Content
To quickly erase the contents on a Flash device (support FAT format).
4.7 System Info.
To check the firmware version.
4.8 System Update
To update the firmware via USB.
5. Setup
5.1 Copy Area To set copy area.
5.1.1 Only Data Area
To detect the format FAT16, 32/NTFS/Linux (Ext2, Ext3) and directly
copy the data area.
5.1.2 Whole Media To copy the Flash devices whole content including empty space.
5.2 Button Beep To hear a beep or not when pressing a button.
5.3 Language Supports English and Japanese