EZ Dupe Portable USB 2 Copy Duplicator & Tester - Manual (Page 7)

**Do not remove any Flash device while it is processing.
** When the copying process is in progress, the green LED will flash. When the process has finished the
green LED will stop flashing but will remain illuminated. If an error occurs the red LED will illuminate.
3. Copy & Compare
This function first makes a copy and then compares the target Flash devices with the source (master)
Flash device to ensure data integrity.
4. Utility
4.1 Device Info.
This function displays the Flash device’s general information including capacity, format and data size.
Show Flash device’s Info. Steps:
1. Insert Flash devices into duplicatorÆSelect [4. Utility] ÆPress [OK] ÆSelect [4.1 Device
Info.]ÆPress [OK] ÆSystem displays the devices info.
2. Press [Forward]/ [Backward] to check other Flash devices’ info.Æ Press [ESC] to finish
4.2 Check USB Virus
This function quickly helps to check USB Flash devices for any hidden USB VIRUSES.
**This function is specially designed for Auto Run USB VIRUS checking only, not for other types of
viruses. It can only check to see if the virus is present, but cannot clean or eliminate the virus.
6