Kramer Electronics VP-460 - Manual (Page 21)

16 VP-460 - The OSD Menu
5.2.1.1 Changing the Size of the Main and/or PiP Window
Use the H Width and V Height to change the size of the window using the + and –
buttons on the front panel or remote control transmitter (as illustrated in
Figure 5 ).
Figure 5: changing the size of the Window
To change the size of the window, do the following:
1. Check that window control is set as required (for example, PiP Window
Control).
2. Select Window Customization (see Figure 9 ).
3. Select H width (an OSD slide bar appears) and press + to increase the
width, or – to decrease the width, see Figure 6 .
The following example shows how to decrease the width of the window
Figure 6: Increasing the Width