Kramer Electronics VP-460 - Manual (Page 34)

VP-460 - The OSD Menu 29
29
automatically reads the EDID of that display and updates the output resolution
accordingly
• If the VP-460 cannot find the EDID of the Master Connection output, it cannot
obtain the Native resolution, and the output resolution is set to 720p @60
(default)
5.8 The Miscellaneous Menu
Figure 21: Misc Menu
Setting Function
Information Displays the input resolution and frequency, the output resolution and
firmware versions E
If the selected output is the native output resolution, it will be displayed
under "Native Output:"; in case of an explicit output resolution the title will be
"Output:"
OSD Set:
Window Control – to Main Window Control to set the OSD menu to
control the Main window (letting you select the input and other
parameters for the main window) or to PiP Window Control to control
the PiP window (letting you select the input and other parameters for
the PiP window) E
H Position – to set the horizontal position of the OSD E
V Position – to set the vertical position of the OSD E
Transparency – to set the transparency to On or Off E
Transparency Gain – to set the transparency level (once set to
transparent) E
Transparency Bias – to set the transparency level E
Blink – to On for the selected item in the OSD to blink, or Off E
Blink Period – to determine the blinking rate E
Timeout – to 30 seconds before OSD timeout, 60 seconds before
OSD timeout or OFF (Off means that that the OSD appears
continuously) E