Kramer Electronics VP-731 - Manual (Page 22)

VP-731 - Presentation Switcher / Scaler Buttons 17
17
6.2.2 Selecting the PIP Source
To easily select the PIP source, press and hold the PIP front panel button while
pressing the input button of the required PIP source.
For example, to select PC 2 as the graphic PIP source over a video background,
press the PIP front panel button while pressing the PC 2 front panel button.
To select the PIP source using the IR remote controller, press the desired PIP
source on the remote controller.
For example, if you want to select HDMI 2 as the PIP source, press the HDMI 2
button in the PIP source area on the IR remote controller.
To set the PIP source via the OSD menu, do the following:
1. Press the MENU button to enter the OSD menu.
2. Press the button to move to the PIP icon.
3. Scroll down to select Source and press ENTER.
4. Use the or buttons to select the PIP Source from the drop-down list
box, and press ENTER (see Figure 17 ).
5. To exit the OSD menu, press the MENU button.
Figure 10: PIP Source over Background