Kramer Electronics VP-771 - Manual (Page 10)

VP-771 – Overview 5

Advanced deinterlacing functions - including 3D comb filtering, film mode,
diagonal correction and motion detection

Scaled Outputs - HDMI, computer graphics, SDI output and a DGKat TP
output simultaneously

Output Resolutions – HDTV and Computer Graphics up to 2K and
1080p/UXGA with selectable refresh rates

Multiple Aspect Ratio Selections
– Follow input, follow output, best fit,
letterbox

Multi-Standard SDI support - SDI (SMPTE 259M), HD-SDI (SMPTE 292M)
and 3G HD-SDI (SMPTE 424M)

Max. Data Rate - 3Gbps (3G HD-SDI).

Looping 3G HD-SDI Input

SDI channeling, letting you select one active audio signal and three
bypassed signals from eight embedded stereo audio channels

Multi-Standard Video support - NTSC (3.58/4.43), PAL (M/N/60) and SECAM

Built-in Time Base Corrector - Stabilizes unstable video sources

Built-in Proc-Amp with enhanced functions such as color correction, gamma
and dither

Input and output audio level adjustment

Unbalanced microphone input (48V phantom power)

Digital (S/PDIF) and unbalanced stereo audio inputs and outputs, with
microphone talkover or microphone mix

A built-in 2x10W power amplifier with speaker outputs on a 4-pin terminal
block connector

Automatic detection and selection of the HDMI and DP embedded audio.
The VP-771 automatically outputs the signal from the HDMI and DP
embedded audio inputs or performs an analog takeover to output the
respective analog audio input

Selectable Power Save modes for energy efficient usage

HDCP Compliant - The HDCP (High Definition Content Protection) license