AVerMedia Technologies 1500 MCE - Manual (Page 15)

Chapter 3
TV
-11-
To delete a channel group:
1. Click the
Setup button
. In the Setup dialog box, click the
Group tab.
2. From the Group Name drop-down list,
select the name of the group you want to
remove.
3. Click
Delete to remove the selected group.
Memorizing TV Channels
Auto-scan will search and memorize all available channels in your area. In the
Channel tab of the Setup dialog box, all scanned and memorized channels are check
marked. If you haven’t done channel scanning when you first started using the
application, simply follow the auto-scan procedure below. (Refer to the section titled
Skipping Unwanted Channels for more detailed information to exclude selected
channels.)
To auto-scan TV channels:
1. Click the Setup button and click the Channel tab.
2. In the Video Source drop-down list, make sure the TV option is selected. Then
select Ant. to search for air channels or select CATV to scan for cable channels.
3. From the Country drop-down list, choose your region.
4. Click Channel Scan to start the searching process.
The application has a default frequency table. When you click Channel Scan,
the application will use the frequencies in this table and search for active
channels. Active channels will then be memorized by the application.
5. You can terminate the searching process anytime. Just click Stop.
6. Check and verify that you can access all the TV channels. (Refer to the section
titled Selecting a TV Channel for more detailed information regarding channels
access.)
7. If there are channels missing from the channel memory, click All Frequency
Scan. The following message will appear: