Modifying tv channel frequencies, Fine tuning color and display quality – AVerMedia Technologies 1500 MCE User Manual
Page 22
Chapter 3
TV
-18-
Modifying TV Channel Frequencies
It is not recommended to edit the frequencies of TV channels unless you are very
familiar with local TV frequencies.
To edit the TV frequencies:
25. Click the
Setup button
and click the
Channel tab.
26. In the
Channel List section, drag the horizontal slider rightward to the end.
27. Double click over the channel frequency that you want to modify, type the
desired frequency, and then press
Enter.
28. Click
OK to exit the dialog box.
Fine tuning Color and Display Quality
If the color or picture quality of the TV/video display needs to be adjusted,
click the
Setup button and click the Video tab.
To adjust the color of the TV or video picture, adjust the
Brightness, Contrast,
Hue, Saturation and Sharpness sliders until you get an accurate color. (If you
change your mind and want to change back to the factory default settings, click
Default.)
The Deinterlace function can remove the jagged edges of images in serial rapid
movements. It is recommended using this function to ensure smooth and clear video
images. You can select either
Bob or SmoothEdge to deinterlace the video image.
Bob and SmoothEdge represent two different algorithms. Try both
options to compare which can give you the best picture quality.
N
N
o
o
t
t
e
e