Kramer Electronics VS-88V User Manual
Page 18
Connecting Your 88 Series Matrix Switchers
15
6.1 Connecting a VS-88A
To connect the
VS-88A as shown in Figure 4:
1. Connect up to 8 balanced stereo audio sources
1
(for example, balanced
stereo audio players) to INPUT terminal blocks 1 to 8.
2. Connect up to 8 balanced stereo audio acceptors
1
(for example, balanced
stereo audio recorders) to OUTPUT terminal blocks 1 to 8.
3. If you are using a PC to control the device, connect the serial port of the
controlling device to the RS-232 IN 9-pin D-sub connector.
4. Connect the power cord
2
.
5. Set DIP-switch # 1 OFF and DIP-switches # 2, 3, 4, 5 and 6 ON (see section
7.2.1). The IN SYSTEM button is non responsive.
Figure 4: Connecting the VS-88A
1 You are not required to connect all inputs or outputs
2 We recommend that you use only the power cord that is supplied with this machine