Kramer Electronics VS-88V - Manual (Page 27)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
24
7.3.2 Recalling a Setting
To recall a setting, do the following:
1. Press the RCL button. The RCL button flashes.
2. Press the Output #. The LED Output display # flashes
1 , displaying what was
previously stored.
3. Press the RCL button again. This recalls the stored data.
By design 2 , you cannot recall data that is stored in a particular unit from a
different unit. Each unit, even when set to the IN SYSTEM mode, stores its
own data separately.
7.3.3 Locking and Unlocking Settings
The PC includes a flexible locking 3 mechanism to safeguard settings on the
switchers. To prevent changing the settings accidentally
4
, lock your
switchers. Unlocking releases 5 the protection mechanism.
From the PC you can lock and unlock the following:
A specific switcher
All switchers
Table 6: Push Button Sequence Summary
Lock Unlock
Specific Switcher
TAKE + MACHINE IN SYSTEM # + STO TAKE + MACHINE IN SYSTEM # + RCL
All Switchers
TAKE + ALL + STO TAKE + ALL + RCL
8 Technical Specifications
Table 7, Table 8, and Table 9 list the technical specifications for the 88
Series switchers.
1 At this stage, pressing a different # changes the Output #
2 On one occasion the same unit can function in the standalone mode, and on another occasion in the IN SYSTEM mode
3 Locking means that the front panel is locked. The switcher still operates via the PC
4 Especially if the system is complex and the switchers are stored on a rack in another room
5 Restarting a switcher also releases the protection mechanism (without wiping out the switcher settings)