Kramer Electronics EDID Designer - Manual (Page 16)

14 EDID Designer - Using the EDID Designer
3. Click Save to write the EDID to its source or Discard to throw out any
changes made since the last save.
4.6 Copying or Deleting an EDID to/from the Disk
You can make additional copies of an EDID file on the disk or delete the file from
the disk.
To make an additional copy of an EDID on the disk:
1. In the Local EDID file panel, right-click the desired EDID cube.
The Delete/Copy window opens.
2. Click Create a Copy. A warning message appears:
Only this message appears when copying an input EDID to local files on the disk.
3. Click Yes to make a copy or No to exit.
The copied file appears as a new cube in the upper-left corner of the Local
EDID file panel with an _0 extension.