Kramer Electronics EDID Designer - Manual (Page 8)

6 EDID Designer - Defining the EDID Designer
3 Defining the EDID Designer
Figure 1 defines the basic elements of the EDID Designer main screen.
Figure 1: Main Screen
# Feature Function
1 CONNECT Bar Connects an attached device (serial or Ethernet)
2 INPUT Panel Displays all available EDIDs on EEPROM of the relevant input
channel of the connected device
3 REFRESH Button Reloads all EDID information from the chosen source to the
panel
4 Resizing Handle Drag any handle to resize the desired panel
5 OUTPUT Panel Displays all EDIDs of the devices/monitors connected to the
outputs of the connected device
6 DEFAULT EDID
DEFINITIONS Panel Displays all available default Kramer’s EDID definitions
7 EDID Display Panel Displays the chosen EDID for editing or viewing (of read-only
EDIDs)
8 EDID Cube The graphic representation of an available EDID, showing title,
resolution, manufacturer and serial number taken from the
General Information tab
Since EDID blocks saved on a device input’s EEPROM have no file
name, we recommend using the serial number field as a file
identifier when editing an EDID block