WIKA DI10 - Manual (Page 22)

6 Commissoning, operation
22 WIKA operating instructions digital indicator DI10
Menu level Parameterization level
ZErO
Zero point tranquilization, ZErO:
0 0
With zero point tranquilization, a value range around zero can
be preselected at which the display shows zero. If, for
example, a 10 is set, the display would show a zero in the
range from -10 to +10 and continue below it with -11 and
above it with +11.
tASt
MIN/MAX value inquiry - Assignment of key functions,
tAST:
EHEr
LI.12 no
Here, you can enter for the operating mode either a MIN/MAX
value inquiry or a threshold value correction on the arrow
keys.
If the MIN/MAX memory is activated with EHEr, the measured
MIN/MAX values will be saved during operation and can be
called up via the arrow keys [
▲
] [
▼
]. The values are lost if the
device is restarted.
If the threshold value correction LI.1 is selected, the limit
values can be changed during operation without hindering the
operating procedure.
If no is parameterized, the arrow keys [
▼
] [
▲
] have no
function in operating mode.
FLAS
Flashing of display, FLAS:
LI-1
LI-2 LI.12 no
Here, flashing of the display can be added as an extra alarm
function, either to the first limit value (select: LI-1), the second
limit value (select: LI-2) or to both limit values (select: LI.12).
With no (works setting), no flashing is assigned at all.