WIKA DI10 - Manual (Page 31)

9 Dismounting, return and disposal
WIKA operating instructions digital indicator model DI10 31
CAUTION!
If faults cannot be eliminated by means of the measures
listed above, the instrument must be shut down immediately,
and it must be ensured that pressure and/or signal are no
longer present, and it must be prevented from being
inadvertently put back into service.
In this case, contact the manufacturer.
If a return is needed, please follow the instructions given in chapter "9.2
Return".
9 Dismounting, return and disposal
WARNING!
Residual media in dismounted instruments can result in a
risk to persons, the environment and equipment. Take
sufficient precautionary measures.
9.1 Dismounting
To dismount the instrument, do the following steps:
Indicator for panel mounting:
1. Open the clamping screws and remove the fixing elements.
2. Remove the instrument and seal from panel cutout.
Indicator for wall mounting:
For dismounting the indicator open the four fastening screws of the enclosure
and remove it.