Next Advance 50-AU - Manual (Page 6)

6
Operator’s Manual for the Bullet Blender ® 50
WARRANTY
Next Advance warrants its Products
against defects in materials and
workmanship for time periods which
vary according to the Product. Within
these time periods, Next Advance will
replace or repair, without charge to the
original purchaser, any part which is
defective.
Bullet Blender Two years
The warranty is void if the Product is
defective due to product accident,
product modification, exposure to
radiation other than for sterilization,
connection to an improper electrical
supply, lack of proper maintenance,
contamination, improper installation or
misuse. If the product is used in a manner
not specified by the manufacturer, the
protection provided by the equipment
may be impaired. The warranty shall also
not apply to defects arising from fire,
flood, lightning or other conditions
unrelated to correct operation of the
Product.
Next Advance’s liability is limited, at
the company’s election, to (1) refund of
the original purchaser’s purchase price
for the Product (2) repair of the Product,
or (3) replacement of the Product or
defective parts. Evidence of purchase by
the original purchaser is required. Next
Advance may also request
documentation of proper maintenance, if
applicable.
Next Advance makes no other warranty,
express or implied, with respect to its
Products. NEXT ADVANCE MAKES NO
WARRANTY RESPECTING THE MER-
CHANTABILITY OF THE PRODUCTS
OR THEIR SUITABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE OR
USE. Next Advance shall not be liable for,
indirect, special, incidental or consequential
damages of any nature. Any recovery for
any claim shall be limited to the original
purchase price for the product.
Operator’s Responsibility
Provide proof of purchase and provide
normal care and maintenance.
WARNINGS AND CAUTIONS
Read the user’s manual before operating.
Do not carry the instrument by the dry ice
compartment. Instead, lift from the bottom
sides of the instrument.
Do not operate Bullet Blender
® 50
instruments with fewer than 2 sleeves in
place.
Do not open lid or cover when the Bullet
Blender® is in use.
Wear cryogenic gloves when handling dry
ice.
Do not use the inner container of the dry ice
cooling compartment to transport ice.
Do not use regular water ice in the dry ice
cooling compartment.
Do not insert fingers or objects other than
recommended tubes into sample tube holes.