Operator’s manual for the bullet blender – Next Advance 50-AU User Manual

Page 7

Advertising
background image

7

Operator’s Manual for the Bullet Blender

®

50

Use caution when closing Bullet
Blender

®

lid- do not close on fingers.

Use recommended tubes only.
No user serviceable parts are inside.
For indoor use only.
Pollution Degree 2 per EN 61010-1.
Overvoltage Category II per EN 61010-1.
Enclosure Protection: Not Protected
Against the ingress of Moisture.
Sound Pressure Level: Up to 90dBA. Use
hearing protective devices that reduce
exposure to below 85 dBA during
prolonged exposure.
Do not immerse in liquid.
Before touching the Bullet Blender

®

,

touch a bare metal surface to discharge
static electricity.

DISCLAIMER

Next Advance, Inc. makes no

representations or warranties, expressed,
statutory or implied, regarding the fitness
or merchantability of this product for any
particular purpose. In no event shall Next
Advance be liable for incidental or
consequential damages. Next Advance,
Inc. is not liable for any damages,
including but not limited to, lost profits,
lost savings, or other incidental or
consequential damages arising from
ownership or use of this product, or for
any delay in the performance of its
obligations under the warranty due to
causes beyond its control.

Next Advance, Inc. also reserves the

right to make any improvements or
modifications to the product described in
this manual at any time, without notice of
these changes. Next Advance, Inc. products
are not designed, intended, or authorized for
use in applications or as system components
intended to support or sustain human life, as
a clinical medical device for humans, or for
any application in which the failure of the
product could create a situation where
personal injury or death may occur.
All brand and product names used in this
manual are the trademarks of their
respective owners.

CONTACT INFO

Next Advance, Inc.
Averill Park, NY, USA
Telephone 518-674-3510
www.nextadvance.com
[email protected]

Advertising
This manual is related to the following products: