American Aimers B4A - Manual (Page 12)

B4A manual page 12 Page 1 of 1
http://www.hopkinsmfg.com/test2/b4a_manual_page_12.htm 8/13/99
Home
Vision Aimers
Vision 100
Warranty Registration
Vision 1
Instructions
Parts List
B4A
Instructions
Parts List
Aiming Screen Manual
LiteMate Trailer Wiring
Levels
Contact Information
B4A Instruction Manual
Page 12
7. If the vacuum extension plate and articulating vacuum cup is on the B4A Aimer, then the rods must all be set
at the same number. (Fig. 21). For the standard rectangular, this number ranges between 8 and 12.
8. Perform the aiming process.
Return to table of contents
[ Home ] [ Vision ] [ LiteMate ] [ Levels ] [ Contact Info ]