Howard SVR1 Regulator - Manual (Page 8)

Document 2.4.114 SVR-1 Step Voltage Regulator
Copyright © 2012 Howard Industries, Inc. Document No. 2.4.114
Revision: 03
Issued: March, 2012
8
High-voltage bushings (3)
High-voltage terminals (3)
Internal assembly lift-
ing eyes (2)
Shunt arrester mounting
provisions (3)
Tank grounding provi-
sions (2)
Bolt-down provisions (4)
Laser-engraved nameplate
(tank-mounted)
kVA label
Drain valve and oil
sampling device
Laser-engraved name-
plate (mounted on
control enclosure)
Control enclosure
Control cable
Pole mount brackets (2)
Automatic pressure
relief device
Tap position indicator
Cover-mounted terminal
block enclosure
Oil level sight gauge
Regulator lifting lugs (2
or 4)
Upper filter press and oil
fill connection
By-pass arrester (MOV)
HI-Amp™ upper limit
switch
HI-AMP™ lower limit
switch (hidden)
FIGURE 4: SVR-1 step voltage regulator.