AMX NETLINX MASTER NXC-ME260 - Manual (Page 30)

Firmware Transfers
26 NXC-ME260 NetLinx Master-Ethernet Card/Module
4. Review the File, Connection, Address, and Target Device information before you send.
! Check the Reboot option.
! Click the Send button to send the selected KIT file to the specified device. You can watch
the progress of the transfer in the Send to NetLinx Device dialog.
! When the transfer is finished, and the reboot is complete, press the Close button.
Allow 20-30 seconds for NetLinx Masters to reboot. When the Master has rebooted,
the Status LED on the front panel blinks once a second to indicate that it is
functioning properly. Once it has rebooted, click OK.