AMX NETLINX MASTER NXC-ME260 - Manual (Page 5)

Product Information
1 NXC-ME260 NetLinx Master-Ethernet Card/Module
Product Information
The NXC-ME260 Master-Ethernet Card is a Master Card for NetLinx systems with a 10/100BaseT
TCP/IP Ethernet connection, and an RJ-11 SPE (Server Port Expander) connector for use with an
AXB-SPE (Server Port Expander). The NXC-ME260 is the only Master Card you need, as it
incorporates the functionality of all previous NetLinx Master Cards (NXC-M, NXC-ME, and
NXC-MPE).
Beyond replacing the previous set of NetLinx Master Cards, the NXC-ME260 represents a high-
performance NetLinx Master Controller. With double the Flash memory (16 MB) and a more
powerful processor (Coldfire 5407), the ME260 is faster than previous NetLinx Masters.
The NXC-MPE260 can be loaded in the Master Card slot of an NXF NetLinx Cardframe, in an
NXI Integrated Controller, or in an NXM-MHS Module, as shown in FIG. 1.
Front and rear panel components
FIG. 1 shows the front and rear panel components of the NXC-ME260.
FIG. 1 Front and rear panel components
STATUS
PROGRAM
OUTPUT INPUT
9-pin PROGRAM port
Status LED (green)
Output LED (red)
Input LED (yellow)
ICSNet
Master-Ethernet
NXC-ME260
PWR
12VDC
AXlink
GN
D
AXP AX
M
TX
PROGRAM
RT
S
PW
R
CTS GN
D
RX
ETHERNET
SPEED
10/100
FD
IN
OUT
ICSHub
Ethernet 10/100 connector
Ethernet 10/100 LEDs
ICSNet connectors/LEDs
ICSHub IN/OUT
connectors/LEDs
PROGRAM port connector
AXLink connector
AXLink status LED (green)
Expansion Out connector
12 VDC power supply connector
Front
Rear