AMX NETLINX MASTER NXC-ME260 - Manual (Page 40)

NetLinx Security
36 NXC-ME260 NetLinx Master-Ethernet Card/Module
Edit Group menu: Delete directory association
1. At the Edit Group prompt, type 2 to delete an existing directory association. A sample session
response is:
Select a directory association from the following:
1) /directory1/*
2) /directory2/*
Select Directory ->
2. Select the directory association to be deleted, and press <ENTER> to delete the directory
association, and return to the Edit Group menu.
Edit Group menu: List directory associations
1. At the Edit Group prompt, type 3 to list all existing directory associations. A sample session
response is:
The following directory associations are enrolled:
/directory1/*
/directory2/*
Press <ENTER> key to continue
2. Press <ENTER> to return to the Edit Group menu.
Edit Group menu: Change Access Rights
1. At the Edit Group prompt, type 4 to change the current access rights for the selected group
account. A sample session response is:
Select to change current access right:
1) Terminal (RS232) Access...................Disabled
2) Admin Change Password Access..............Disabled
3) FTP Access................................Disabled
4) HTTP Acccess..............................Disabled
5) Telnet Access.............................Disabled
6) Security Configuration Access.............Disabled
or <ENTER> to return to previous menu
Set Rights ->
2. Each selection simply toggles the security setting selected. <ENTER> is entered by itself to
exit the menu and return to the Main Security Menu.
The Master must be rebooted after changing the HTTP setting.