MSI MS-91E2 User Manual
Page 23
Hardware Setup
▍
MS-91E2
2-5
Hardware Setup
▍
MS-91E2
Important
Confirm if your CPU cooler is firmly in-
stalled before turning on your system.
Do not touch the CPU socket pins to
avoid damage.
•
•
Visually inspect if the CPU is seated
well into the socket. If not, take out
the CPU with pure vertical motion
and reinstall.
5.
Cover the load plate onto the pack-
age.
6.
Press down the load lever lightly onto
the load plate, and then secure the
lever with the hook under retention
tab.
7.
Important
Read the CPU status in BIOS.
When the CPU is not installed, always protect your CPU socket pin with the plastic
cap covered (shown in Figure 1) to avoid damage.
Mainboard photos shown in this section are for demonstration of the CPU/ cooler in-
stallation only. The appearance of your mainboard may vary depending on the model
you purchase.
Please refer to the documentation in the CPU fan package for more details about the
CPU fan installation.
•
•
•
•