TotalPond MF13015 - Manual (Page 3)

3
3. Connect the extension tube to the outlet of the pump using
the supplied adapter and adapter for 3/4" outlets. Fig. 3
Fig. 3
4. Place one of the fine filter pads over the bio media balls and
pump. Then place one of the coarse filter pads over the fine
filter pad. Fig. 4
NOTE: The fine filter pad is blue and the coarse filter pad is
black.
Fig. 4
5. Place the filter box top on top of the filter box bottom. It
should snap closed. Fig. 5
Fig. 5
NOTE: This kit includes a coupler and a diverter valve.
a. To flow water to the fountain head only, use the coupler. (Proceed to step 6)
b. To flow water to the fountain head and a spitter, use the diverter valve. (Skip to
step 9)
6. Connect the two extension tubes with the coupler. Fig. 6
Fig. 6
Extension
tube
Extension
tube
Coupler
Coarse filter pad
Fine filter pad
Filter box bottom
Adapter
Extension tube
Pump
Filter box
top
Filter box
bottom
Adapter for
3/4” outlets