TotalPond MF13015 - Manual (Page 6)

6
CARE AND MAINTENANCE – PUMP
•
Regular cleaning of the pump may be necessary depending upon the environment in which it is
operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
•
Before cleaning, always disconnect the pump from the power source.
•
Remove all parts from the pump and clean in warm, soapy water.
•
Disassemble the front cover and remove the impeller cover to expose the impeller assembly.
Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush
to clean the impeller assembly and the inside of the impeller housing.
TROUBLESHOOTING – PUMP
If the pump fails to operate:
•
Check to make sure the power cord is plugged in and the pump is getting power.
•
Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.
•
Remove the filter screen and/or front cover, and impeller cover to expose the impeller. Turn the
impeller to ensure that it is not broken or jammed.
If the performance of the pump is not satisfactory or the pump does not flow evenly:
•
Check to make sure the pump is completely submerged in water.
•
Check to make sure the impeller and the impeller housing are clean.
•
Adjust flow control knob.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department
at 1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday.
Printed in China
Part Description
A Filter box top
B Filter box bottom
F 3-Tier fountain head
G Diverter valve
H Extension tube
I Coupler
K Adapter for 3/4” outlets
L Adapter
M Flow control knob
N Front cover
O Locking ring
P Impeller cover
Q O-ring
R Shaft support
S Washer
T Impeller assembly
U Shaft
A B
M
N
O
P
R
S
Q
T
H
I
F
G
TotalPond replacement filters can be purchased at
Home Depot, item #RF13021.
K
L
U
S
R