TotalPond MF13015 - Manual (Page 5)

5
11. Connect the fountain head to the top extension tube. Adjust
the diverter valve to split the flow between the fountain head
and the spitter. Fig. 11
Fig. 11
12. Place the filter assembly in the water. Fig. 12
Fig. 12
CARE AND MAINTENANCE - FILTER
•
Occasional cleaning of the filter pads will be necessary to ensure the proper functioning of the
system. The coarse filter pad is a designed to trap large debris. The fine filter pad catches smaller
particles. All pads should be removed and washed with clean water when they are visibly soiled.
•
Filter pads should be replaced annually. The exterior surface of the filter box may also need
occasional cleaning. Particularly if the openings in the top of the filter box are obstructed. When
cleaning the filter box use warm water only. Do not use any chemicals that may destroy the
beneficial bacteria.
•
The bio media balls in you filter system and the inside surfaces of the filter box bottom contain the
beneficial bacteria. At least once a year the entire system should be disassembled and cleaned
thoroughly using warm, soapy water (mild detergent). This should not be done during the warm
season as it may take up to 8 weeks to re-establish the environmental balance. The best time of
the year to “breakdown” your system is in early spring before the water temperatures begin to rise.
This is also the ideal time to replace the filter pads.
Fountain head
Diverter
valve
1/2 in.
tubing
Extension
tube
Connect
to spitter