Kodak D4000 - Manual (Page 11)

Setting Up the Printer
1-7
17. Pull the handle on the trim tray to remove the tray.
18. Empty the trim tray.
NOTE: To keep your prints dust-free and to prevent paper jams,
empty the trim tray each time you replace the paper.
19. Insert the trim tray. Align it with the rail on the side of the
printer.
NOTE: If the tray is not inserted properly, a paper jam can occur.
Loading the Ribbon
Make sure you have the KODAK Photo Ribbon D4000S or
KODAK Photo Ribbon D4000L available (see
“Printer Supplies”
on page A-2 ). The same type of ribbon must be loaded on both
sides of the printer. You can replace the ribbon on both sides at
the same time or on one side at a time.
1. Make sure the power switch is turned on ( | ).
2. Unlock and open the front door.
3. Rotate the thermal head release lever on the left side (labeled
L1) or the right side (labeled R1) down to the unlocked
position.
4. If you are:
• loading the ribbon for the first time, go to step 10 .
• replacing the ribbon, continue with the next step.
D4000 Duple x Photo Printer Power Ready Error