Recovering from a power interruption, Recovering from a power interruption -8 – Kodak D4000 User Manual
Page 36
4-8
Troubleshooting
Recovering from a Power Interruption
CAUTION:
If the printer loses power while printing, the printer stops
with the thermal print heads positioned against the platen
rollers. The platen rollers could become damaged if the
thermal print heads are left in this position.
If a power outage occurs:
1. Unlock and open the front door.
2. Rotate the thermal head release levers (labeled L1 and R1)
down to the unlocked position.
3. When power is restored:
a. Rotate the thermal head release levers (labeled L1 and R1)
up to the locked position. Place both of your hands on each
lever and rotate it slowly.
NOTE: Rotating the levers after a power interruption requires
more force than rotating the levers during normal
operation.
b. Power cycle the printer.
c. Send your print job again.