Kodak PULSE - 10 Inch - Manual (Page 12)

5 www.kodak.com/go/pulseframesupport
Getting started
Connecting to your wireless network
When you connect your digital frame to the Internet over your wireless network, you
can perform a host of activities including adding pictures from your computer,
receiving pictures from friends, changing display settings, and more.
Before you start
Before you start connecting your digital frame to your wireless network, make sure
you:
■ Have Internet access and a wireless network set up in your home
■ Know your network name (also called an SSID)
■ Know your wireless network’s security code (password), if you have security
enabled on your wireless network
NOTE: If you are not sure you have a wireless network or don’t know your security password, ask the
person who set up your computer.
Connecting with the network setup wizard
NOTE: If someone else set up your digital frame for you (for instance, if it was a gift), your screen may show
fewer steps.
After you select your language, the network setup wizard appears.
1 Touch Start .
Available wireless networks are listed.
If your wireless network is not shown, see page 10 .
NOTE: Touch Back to return to the language screen.
To bypass the wireless setup and go directly to viewing
pictures, touch Exit
. You can set up your wireless
connection later, see page 11 .