Connecting the pc to the rs232 port, Connecting the pc to the rs-232 port, Rs-232 p – ADC 410F User Manual
Page 26: Onnecting the
Advertising
Connecting the PC to the RS-232 Port
18
Megabit Modem 410F and 420F User Manual
C
ONNECTING THE
PC
TO THE
RS-232 P
ORT
Connecting the PC to the RS-232 port is an optional procedure. However, if you use the
recommended configuration for the modem, you will initially set up parameters using this
interface.
1
Connect the modem to a PC as shown below.
2
Configure these communication settings (if using terminal emulation, select ANSI):
•
9600 baud
•
no parity
•
8 data bits
•
stop bit
•
flow control off
Network device
AD
SL
PO
W
ER
10BASE-T
RS232
M
GMT
MDI
M
DI-X
RS-232 MGMT port
Megabit Modem 410F or 420F
Advertising
This manual is related to the following products: