ADC 410F - Manual (Page 47)

Chapter 4: Setting Up for Configuration
Megabit Modem 410F and 420F User Manual 39
R
ESETTING THE
M
ODEM TO
F
ACTORY
D
EFAULTS
You can return Megabit Modem 410F and 420F parameters to the factory default values. This
provides a known starting point if you are troubleshooting the system or simply want to
reconfigure parameters. The factory default values are listed on
page 40 .
1 Click System on the Main Menu to access the System Menu.
2 Click Factory Default on the System Menu .
3 Do one of the following:
• Click Proceed to return to factory default values and reset the modem.
• Click Cancel . The parameters to not reset to the factory default values.
When you click Proceed to return to factory default values, the modem
automatically resets.