American Audio DCD-PRO310 MKII - Manual (Page 16)

Holding down or tapping on the (+) PITCH
BEND BUTTON (14) will provide a speed
bump in the playback pitch.
© American Audio ® - www.americanaudio.us - DCD-PRO310 MKII™ Instruction Manual Page 16
BASIC OPERATIONS (CONT)
10. PITCH bEND:
This function will momentarily increase or decrease a tracks playback speed. There are two ways to operate
this function with the (-) & (+) PITCH BUTTONS (14) or with the JOG wHEEL (1). The maximum pitch bend
percentage allowed is +/- 16%. The pitch bend function will work in conjunction with the PITCH SLIDER (3)
pitch setting.
PITCH bEND bUTTONS (14):
The (+) PITCH BEND BUTTON (14) will provide a speed bump and the (-) PITCH BEND BUTTON (14) will
provide a slow down. The maximum range of the PITCH BEND BUTTONS is 16%. The extent to which the
speed changes is proportionate to the amount of time the button is pressed. For example, if the (+) PITCH
BEND BUTTON (14) is held down continuously, the disc speed will increases and will continue to increase until
reaches a maximum of 16% speed gain. when you release the (+) PITCH BEND BUTTON (14) the disc speed
will automatic
ally return to it’s previous speed.
Holding down or tapping on the
(-) PITCH BEND BUTTON (14) will
provide a slow down in the play-
back pitch.
Figure 14
Figure 15
JOg WHEEL (1):
The JOG wHEEL (1) will temporarily bend the pitch
if a track is in play mode Rotating the wheel in a
clockwise direction will increase your track pitch and
rotating the wheel in a counter-clockwise direction
will slow your track pitch. The speed you rotate the
JOG wHEEL (1) will determine pitch bend percentage
(%).
Figure 13