American Audio DCD-PRO310 MKII - Manual (Page 18)

"FLIP-FLOP' (RELAY) CONNECTION AND SET UP
12. RELAY (FLIP-FLOP™)
This feature is a kind of “auto pilot." “Flip-Flop™” mode can only function with the both drives of the
DCD-PRO310 MKII. with “Flip-Flop™” you can have one disc drive begin playback when the other
ends. you can “Flip Flop™” single tracks, or entire discs.
1) Load disc drives with audio discs.
2) Press the RELAy BUTTON (12), the LED above the RELAy BUTTON will light up letting you
know that Flip-Flop™ mode has been activated. Press the SGL/CTN BUTTON (7) to choose
between SINGLE mode or CONTINUOUS mode.
3) After they have both cued, press the PLAy/PAUSE BUTTON (17) on one of your drives to begin
playback.
4) If you have the cd player set to SINGLE mode, the first cds' single track will play and after it has
ended the second cds' track will immediately begin playback. If the player is set to CONTIN-
UOUS mode, the first cd will play all the way through, and then after it has ended the second cd
will start.
5) FLIP FLOP™ will continue until you stop it or power is interrupted.
6) To deactivate Flip-Flop™ mode, press the RELAy BUTTON again.
© American Audio ® - www.americanaudio.us - DCD-PRO310 MKII™ Instruction Manual Page 18