American Audio DCD-PRO310 MKII - Manual (Page 17)

BASIC OPERATIONS (CONT)
2) Press the IN BUTTON (4). This will set the start-
ing point of the SEAMLESS LOOP (figure 17). The
IN BUTTON LED will blink.
1) Press PLAy/PAUSE BUTTON (17) to activate
playback mode.
13. CREATING AND PLAYING A LOOP
A loop is a sound loop that plays continuously. you can use this loop to create dramatic effect in your mixing.
This loop has no time limit and you could actually loop the entire length of disc.
3) Press the OUT BUTTON (11) to set the end-
ing point for your Loop (Figure 18). The LOOP IN
AND OUT BUTTON LEDs will stay lit indicating a
Loop is playing. Press the OUT BUTTON again to
cancel the Loop.
Figure 18
Figure 17
Figure 16
4) Press the RELOOP BUTTON (16) to reactivate
the loop. Press the OUT BUTTON (11) to deacti-
vate the loop.
Figure 19
© American Audio ® - www.americanaudio.us - DCD-PRO310 MKII™ Instruction Manual Page 17
Press the OUT BUTTON (11) again when you
reach your new ending point (Figure 18).
-
fOR A SHORTER LOOP: Press the OUT
BUTTON (11) at sooner point in the track
(Figure 18).
-
fOR LONgER LOOP: Press the OUT
BUTTON (11) at later point in the track
(Figure 18).
5)