Lenovo LI2821 Wide LCD Monitor - Manual (Page 31)

Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft
Windows 8 and Microsoft Windows 8.1.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at 60 Hz(VGA),3840 x 2160 at 30Hz(HDMI),
3840 x 2160 at 60Hz(DP) or 640 x 480 at a refresh rate of 60 Hz.
Chapter 3.
3-5
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
. )URPWKH/HQRYRZHEVLWHhttp://supportOHQRYRFRP/IZAILQGWKHFRUUHVSRQGLQJ
PRQLWRUGULYHU and GRZQORDGLWWRD3&WRZKLFKWKLVPRQLWRULVFRQQHFWHG VXFKDV
GHVNWRS .
. Open the Display Properties window by clicking Start, Control Panel, Hardware and
Sound icon, and then click the Display icon.
. Click the Change the display settings tab.
. Click the Advanced Settings icon.
. Click the Monitor tab.
. Click the Properties button.
. Click the Driver tab.
1
. Click Update Driver, then click Browse the computer to find the driver program.
1 . Select Pick from the list of device driver program on the computer.
1 . Click the HaUG Disk button. %\FlickLQJ the Browse buttonEURZVHand SRLQW to the following
SDWK:
X:\Monitor Drivers\Windows 7
(where X
LQGLFDWHV theIROGHULQZKLFKWKHGRZQORDGHGGULYHULVORFDWHG VXFKDVD
GHVNWRS .
1 . Select the "lenli2821wa.inf" file and click the Open button. Click the OK button.
1 . ,QWKHQHZZLQGRZVelect LEN LI2821wA and click Next.
1 . $IWHUWKHLQVWDOODWLRQLVFRPSOHWHGHOHWHDOOGRZQORDGHGILOHVDQGFORVHDOO windows.
1 . Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.