Acomdata.com RPDOCKU2FA - Manual (Page 16)

D
OCK
P
OD
I
N
-D
EPTH
S
TACK
&P
LAY
™ C
ONNECTOR
Your DockPod has two main func-
tions: 1) to supply electrical power
for up to five stacked-on RocketPod
modules, and; 2) to relay data signals
between those modules, your computer,
and other devices connected to the same USB
and/or FireWire data buses.
The Stack&Play connector, located on the top-side of your DockPod,
is the power and data link to your stacked-on RocketPod modules.
The standard power and data connections located on the back of the
DockPod are used to connect DockPod to your computer.
S
TACK
L
IGHT
The Stack light, located on the fascia of your DockPod, tells you when
a proper link has been established between the DockPod and any
stacked-on RocketPod modules. The Stack light will be illuminated
when your DockPod is powered on and one or more RocketPod
peripherals are stacked onto the DockPod.
14